Opening Hours

Mon - Sun, 6:00 AM - 9:00 PM

இந்தப் பக்கத்தை தமிழில் படிக்க

Hollow Concrete Blocks from TKR Building Materials, Tenkasi

Building Material in Tenkasi

Hollow Concrete Blocks

TKR Building Materials supplies machine-made hollow concrete blocks in 4, 6 and 8 inch thicknesses across Tenkasi district. A hollow block has two or three cores that cut its weight by about a third compared with a solid block of the same size, so walls go up faster, load less onto the frame and insulate better against heat and sound. They are the usual choice for partition walls, upper-floor infill in RCC-framed houses and long compound walls.

  • 4", 6" and 8" thick, standard 16" x 8" face
  • About 1.1 to 1.2 blocks per square foot of wall
  • Lighter than solid blocks, reducing dead load
  • Better heat and sound insulation from the air cores

Where to use hollow blocks

Use 4 inch hollow blocks for internal partitions and 6 inch for external infill walls in RCC-framed houses, especially on first and second floors where saving weight reduces beam and column steel. Use 8 inch blocks for compound walls and single-storey load-bearing walls where the engineer allows. For walls that will carry heavy wall-hung loads or need chasing for conduits, solid blocks or bricks are easier to work with.

Hollow blocks vs solid blocks vs bricks

Hollow and solid blocks share the same 16 x 8 inch face, so both need about 1.1 to 1.2 pieces per square foot against 10 or more chamber bricks. Hollow blocks are lighter and insulate better; solid blocks are stronger in compression and better for fixings. Both lay two to three times faster than bricks and take thinner plaster. See our guides on cement blocks vs red bricks and AAC vs red bricks for the full comparison.

Quality, delivery and counting

Our blocks are machine-pressed and properly cured, so they hold their dimensions and do not crumble at the edges. They are counted onto the vehicle, stacked to limit breakage and delivered by tipper or lorry across Tenkasi, Ilanji, Courtallam, Shencottai, Kadayanallur, Alangulam, Surandai, Puliyangudi and Sankarankovil. Order M-Sand and cement for the mortar on the same trip.

How to order Hollow Blocks in Tenkasi

  1. Call or WhatsApp +91 76676 66264 with your site location and quantity.
  2. We confirm today's rate, availability and a delivery slot.
  3. Pay by cash, bank transfer or UPI on delivery. Credit terms are available for regular clients.

All materials, equipment and delivery slots are subject to availability on the day of the order.

Guides on Hollow Blocks

Hollow Blocks Questions

Customers Often Ask

Hollow block prices depend on size, quantity and delivery distance. Call or WhatsApp +91 76676 66264 with the size and number of blocks for a delivered quote.
With a standard 16 x 8 inch face, about 1.1 to 1.2 blocks per square foot of wall after allowing for mortar joints. A 10 x 10 ft wall needs roughly 115 blocks plus 5% for wastage.
Yes for infill walls in an RCC-framed house and for compound walls, which is how they are mostly used in Tenkasi. For load-bearing walls, follow your engineer’s specification; 8 inch hollow or solid blocks are the usual choice.

Delivery Across Tenkasi District

Areas We Serve

From our yard at Ilanji on the Tenkasi - Shencottai main road, we deliver building materials and send JCBs, tippers, tractors and water tankers to sites across Tenkasi district and nearby parts of Tirunelveli district. Same-day delivery is usually available for orders placed before noon, subject to stock and vehicle availability.

Planning a build? Standard house construction in Tenkasi starts from about ₹2,000 per sq ft. See the construction cost guide for what that covers and the material quantities you will need.